Check out 8 Common Habits That Explode Your Cell Phone Battery | cell phone

Your mobile phone battery dying can be a nightmare for the super connected people. Although the risk of battery addiction has been removed for the time being, it is normal for a component over time to lose part of its capacity and begin to deliver less than the nominal value prescribed for the device. But this is not the only reason why your cell phone battery is dying faster than usual.

It is important to stress that the problems presented in the article are not brand dependent. If these issues are not corrected, they could get worse. Therefore, the TechAll I prepared a list of solutions to prevent you from running out of battery. See the lines below.

🔎 iPhone battery cost is increasing in Brazil; Learn the values

👉 What is the most efficient smartphone charger? Join the conversation on the TechTudo forum

1. Set the screen to maximum brightness

Screen brightness has a significant impact on battery consumption. The higher the intensity, the more load is used. Regardless of the type of screen used, be it LCD, Amoled, or Retina, there are cases where extreme brightness is necessary, such as use under sunlight.

Despite this, prolonged use of maximum brightness can cause the battery to drain sooner than expected. Therefore, whenever possible, lower the screen brightness or use the “Adaptive Brightness” function, which will determine the amount of light required and adapt the brightness to ensure that the screen is readable. In the case of OLED displays, it may be a good idea, in addition to reducing the brightness, to use the night mode to reduce the amount of light emitted.

2. Run very heavy games

The higher the application demand, the more battery drain and games are no exception. Heavier games run at the highest possible quality and tend to increase device power consumption. Therefore, the recommendation in these cases is to make the user aware that if he uses the cell phone excessively, far from the charging points, it may run out of power and without connection.

It is possible to check which applications are the bad guys in consuming cell phone power through applications designed for this purpose, or through the settings of the cell phone, which displays how much each application demands from the smartphone.

3. Depending on inconsistent telephony

Data network instability can be more than a minor annoyance and also affects battery consumption. This instability can be caused by searching for the signal from the phone towers, when the smartphone can’t find the signal. It is possible to discover the cause of the instability with simple steps in the main operators in the country (Vivo, Claro and Tim). If the problem persists, it’s possible to connect the cell phone to a Wi-Fi network with VoLTE turned on — a technology that allows voice calling over a 4G network signal, but can take advantage of common Wi-Fi networks to make calls.

4. GPS is always on

Many apps, when installed, ask for permission to access a smartphone’s location, including mapping, hookup, or dating apps. These programs use the cell phone’s real-time location, which can reduce the device’s battery life. Therefore, it may be necessary to disable GPS when you do not intend to use applications that require it. On Android, just open the notification bar and disable the location icon. On an iPhone, the option is in Privacy, under Settings.

5. Too many background programs

Many applications have functionality to monitor or control background activities, such as calendar and antivirus. However, the drawback is that these apps also need power to function and end up consuming more power on the cell phone. To avoid this, just put your phone in power saving mode, which prevents apps from running in the background. The inconvenience is that notifications in eco mode may take a little longer to be received by the cell phone.

6. Use an old battery

The obvious must also be said. Smartphone batteries can wear out and compromise their health over time, causing a gradual loss of charge capacity. The condition can be demonstrated with apps that will measure the total charge and show the user when it’s time to replace the battery. But remember to perform the replacement only at shops authorized by the brand of the phone, or a cheap one can be expensive with a defective component that can eventually degrade the entire device.

7. Leave bluetooth always on

The use of connections such as Bluetooth and NFC is common in smartphones. Bluetooth generally connects to devices such as consoles, headsets, and other devices, while NFC is commonly used for contactless payments. The reason why bluetooth is such a battery evil is that when it is on it will constantly search for devices to connect to. Therefore, the recommendation is that it only turns on when you use it. Thus, the battery can be saved.

8. Forget the outdated system

Most technology companies maintain a schedule of releasing system updates for their smartphones. These updates often bring improvements in battery management. Google, Apple and Samsung, among others, recommend that you always update the software to avoid excessive load consumption and also to correct errors.

So, in addition to the previous tips, keep your smartphone updated. Learn how to update Apple devices and Android devices like Xiaomi devices.

with information from to benefit fromAnd appleAnd Samsung

🎥 Did the cell phone fall into the water? Find out what to do in the video below.